The Enviro-Vac™ Vacuum Attachment is one auto detail tool that is simply A MUST HAVE TOOL.

LIGHTNING FAST and EXTREMELY EFFECTIVE. The beater on demand is key as it whips loose the embedded dirt clinging to the carpet fibre roots while it quickly suctions it away. The result is an amazing clean carpet that is now prepared for the next “Enviro Tool” the Enviro-Foamer™.

The Enviro-Vac™ comes complete with various attachments that will adapt to any shop vacuum and a long narrow tip that allows for vacuuming hard to reach areas.

The Enviro-Vac™ will outperform any shop vacuum as far as dirt extraction goes. The “air glide” vacuuming allows users to work tirelessly improving cleaning times and efficiencies.

Why Dealers are Joining our Program

Knowledge and Marketing Edge gives retailers POWER! Customers look to their Dealers for the latest technologies and services while Dealers on the other hand look for new ways to out sell their competition by getting in on a unique market to reap the benefits.

Why It Works

Now is the perfect time to introduce an “Auto Disinfecting and Sanitizing Program”! Everyday we hear about deadly viruses and bacteria that lurk everywhere. Consumers are concerned and are taking extra steps to protect themselves against harmful pathogens.

1. To start the cleaning process, use the Enviro-Vac™ to remove any loose dirt and debris prior to using the Enviro-Foamer™.
2. With the carpet and or upholstery now free of debris and loose dirt, just add 50 ml of Carpet and Upholstery Shampoo concentrate, 750 ml of EnviroNize® Catholyte degreaser detergent and 200 ml of EnviroNize® Anolyte disinfection protection into the 1000 ml reservoir and turn on the Enviro-Foamer™. The Enviro-Foamer™ goes right into action providing a deep foaming cleansing solution deep down into the carpet roots where bacteria and dirt thrive.
3. Once the carpet and or upholstery has been shampooed and or cleaned, using the EnviroNizer™ with the solution dial turned off, turn on the EnviroNizer™. With the trumpet end with beater bar pressed into the carpet pile or upholstery go over the area that was recently shampooed. Immediately the EnviroNizer™ will begin to extract the dirt brought to the surface by the foaming cleansing solution leaving the carpet and or upholstery that was shampooed not only cleaned but left with a semi-dry condition that will air dry to complete the process.

Fully fill the 1000 ml EnviroNizer™ reservoir with EnviroNize® Disinfectant solution. Turn it on. Instantly the EnviroNizer™ will begin to provide a fine mist of disinfectant. Using EnviroNizer™ deploy the disinfectant solution throughout the vehicle to ensure adequate disinfectant coverage. The EnviroNizer™ is used primarily as a quick and final disinfection process after the cleaning process has been completed. The Environizer™ requires an auto shop sized air compressor!

Using a fine mist trigger sprayer, mist each area first with EnviroNize® Catholyte, wipe after 3 minutes, then reapply to the same areas using EnviroNize® Anolyte and wipe after 5-8 minutes.