Just add 100 ml of carpet shampoo concentrate,200 ml of EnviroNize™ Catholyte degreaser detergent, 700 ml of tap water and turn it on. Instantly the Enviro-Foamer™ turns the solution into super thick, long-lasting foam. This air-driven foam gun works with your air compressor to produce FROTHY, RICH FOAM that has amazing cling.

The Enviro-Foamer™ can be used for interior carpets and upholstery. Change out the concentrate with the same amount of a wash and wax concentrate and get the same effect for fast and effective exterior detailing. Wheels and Tires are no problem for Enviro-Foamer™ again just change out the concentrate with the same amount of a wheel and tire concentrate. AMAZING and FAST results!!!

Why Dealers are Joining our Program

Knowledge and Marketing Edge gives retailers POWER! Customers look to their Dealers for the latest technologies and services while Dealers on the other hand look for new ways to out sell their competition by getting in on a unique market to reap the benefits.

Why It Works

Now is the perfect time to introduce an “Auto Disinfecting and Sanitizing Program”! Everyday we hear about deadly viruses and bacteria that lurk everywhere. Consumers are concerned and are taking extra steps to protect themselves against harmful pathogens.

Enviro-Foamer™ Exterior Wash and Waxing 

Add 100 ml of Exterior Wash and Wax Shampoo concentrate, 200 ml of EnviroNize® Catholyte and 700 ml of tap water into the 1000 ml reservoir. Turn it on. Instantly the Enviro-Foamer™ turns the solution into a super thick, long-lasting FROTHY, RICH FOAM that has amazing cling. Rinse the exterior with water as the final process. 

Enviro-Foamer™ Wheels and Tires

Wheels and Tires are no problem for the Enviro-Foamer™ just add 100 ml of Wheel and Tire Shampoo concentrate, 200 ml of EnviroNize® Catholyte and 700 ml of tap water into the 1000 ml reservoir. Deploy the Enviro-Foamer™ to the wheels and tires with a rich foam lather solution. Allow the solution to remain on the surface for 2-3 minutes, then agitate with a nylon brush or non-abrasive scour pad to deep clean, then rinse with tap water to complete the cleaning process. 

Enviro-Foamer™ Upholstery Cleaning and Disinfection

To start the cleaning process use the Enviro-Vac™ to remove any loose dirt and debris prior to using the Enviro-Foamer™. With the carpet and or upholstery now free of debris and loose dirt, just add 50 ml of Carpet and Upholstery Shampoo concentrate, 750 ml of EnviroNize® Catholyte degreaser detergent and 200 ml of EnviroNize® Anolyte disinfection protection into the 1000 ml reservoir and turn on the Enviro-Foamer™. The Enviro-Foamer™ goes right into action providing a deep foaming cleansing solution deep down into the carpet roots where bacteria and dirt thrive. Once the carpet and or upholstery has been shampooed, using the EnviroNizer™ with the solution dial turned off, turn on the EnviroNizer™. With the trumpet end with beater bar pressed into the carpet pile or upholstery go over the area that was recently shampooed. Immediately the EnviroNizer™ will begin to extract the dirt brought to the surface by the foaming cleansing solution leaving the carpet and or upholstery that was shampooed not only cleaned but left with a semi-dry condition that will air dry to complete the process. 

EnviroNizer™ Cleaning

During the Carpet, Upholstery Cleaning and Disinfection process it will be important to have a 2~3-gallon pail within reach filled with warm tap water. While the EnviroNizer™ is being deployed in extracting the dirt from the carpet, the trumpet end will begin to fill with the dirt which has been removed. The EnviroNizer™ will periodically require cleaning to remove the dirt and debris. While the EnviroNizer™ is being deployed submerge the trumpet end into the warm pail of water for 30 seconds to clean. Remove the EnviroNizer™ from the pail and re-deploy it to continue with the final extraction and cleaning process. Repeat this step as often as necessary to keep the trumpet clean of dirt and debris while the extraction process is on-going. The cleaning pail may have to be replaced with fresh clean warm water should it become too dirty from the EnviroNizer™ cleaning process.

*This air-driven foam gun requires an auto shop sized air compressor!