Strong injection and ultra-low volume
spraying function ensures the penetration
and diffusion to fine areas.
The EnviroNize® ULV has a wide array of applications, making it one of the most versatile and powerful ULV Sprayers on the market.
The EnviroNize® ULV enables injection of EnviroNize® Disinfectant solution to every area of its targeted disinfection. Its small micron droplet nozzle that is adjustable provides for complete coverage and protection against infectious pathogens.
The EnviroNize® ULV is to be only used with EnviroNize® Disinfectant solution. The EnviroNize® ULV has a unique “open | close” valve providing ultimate spraying. The “Solution Flow” can easily be adjusted from releasing maximum solution when fully open to a reduced smaller micro flow when only slightly open. The EnviroNize® ULV can also be utilized as a “blow dryer” when the “open | close” is valve fully closed. In this setting the EnviroNize® ULV provides quick and immediate blow drying to areas such as electrical components and metals where applied solution should not be exposed to long periods of time.
1. Switch (On/Off - Slider) function control provides a gradual solution flow.
2. One-touch exchange of the solution tank.
3. Powerful Blower allows fast air drying as well as administering solution. Adjustable to 5-10 Micron droplet size.
4. CSA Approved 110V and 220V. Comes with a 3-liter solution reservoir.
5. Spray reaches 5-10 meters.
6. Long supply cord to allow for maximum coverage.
Ideal Setting
1. Adjust Spray Mist using “Adjustable Settings” Valve.
2. Fine Mist (RECOMMENDED) - Fully Close Valve then open 2 turns to maximum of 2.5 full turns.
3. Apply EnviroNize® Disinfectant solution 3 meters or 10 feet from target area with one pass to apply light non wet mist application.
4. Thoroughly BLOW DRY misted area within 1 minute so target area is dry and free of any moisture should mist encounter any electrical component or non-stainless-steel metals.
1. Adjust Spray using “Adjustable Settings” Open Valve.
2. Wet Mist (Non-Metal, Non-Electrical and Non-Painted Porous Surfaces) - Fully open the valve. This will provide maximum wetness. Adjust to desired wetness of spray by slightly closing the valve.
3. Apply EnviroNize® Disinfectant solution (Non-Metal, Non-Electrical and Non- Painted Porous Surfaces) 2 meters or 6 feet from target area. Let air dry.
1. Adjust Spray using “Adjustable Settings” Valve and set to fully closed position. BLOW DRY FEATURE: To be used when misting near and on any metal, electrical components or high- tech lighting:
2. Fully Close the Valve (No Solution) - Turn EnviroNize® ULV to maximum on position to provide just air only NO SOLUTION - Thoroughly BLOW DRY misted area within 1 minute so target area is dry and free of any moisture.
3. Apply BLOW DRY FEATURE 1 meter or 3 feet from target area.