Cleaning and disinfecting play a significant role in all of health care and biosecurity protocols in today's world. Its impact will be treated as a serious economic benefit.
STEP 1: CLEAN
Cleaning is a prerequisite for effective sanitization. Cleaning is the removal of organic matter, using an appropriate detergent - EnviroNize® Catholyte - under recommended conditions. Organic matter from food residues - such as oils, grease, and protein - not only harbours bacteria, but can prevent disinfectants from coming into physical contact with the surface to be disinfected.
The presence of organic matter can inactivate or reduce the effectiveness of some types of disinfectants, rendering them ineffective. For cleaning to be performed properly, the right cleaning agent (EnviroNize® Catholyte) must be selected for the job. Detergents contain surfactants to reduce surface tension between food soil and the surface, so the detergent can penetrate quickly and lift off the soil from the surface.
Step 1: Prepare Device
Step 2: Add Cleaning | Degreasing Solution
(EnviroNize® Catholyte)
Step 3: Deploy Cleaning | Degreasing Solution
(EnviroNize® Catholyte)
Apply light wet-mist to all key, high-touch,
non-porous surfaces.
Step 4: Allow 3~5 Minutes Then Wipe
Allow sufficient contact time to activate.
Then wipe same sprayed surfaces.
CLEAN | DISINFECT
PREPARE FOR STEP 2
After deploying the cleaning and degreasing solution (EnviroNize® Catholyte) to all Key High Touch Non-Porous Surfaces, empty the remaining solution from the EnviroNizer™ Cordless sprayer back into the original EnviroNize® Catholyte container.
Prepare the EnviroNizer™ Cordless sprayer for the Disinfection process Step-2.
STEP 2: DISINFECT
Disinfect the surfaces and equipment with EnviroNize® Disinfectant solution, using the correct application procedure to reach maximum kill contact time. Always refer to the product label for its product use and direction.
EnviroNize® Disinfectant Solution is a powerful antimicrobial, is non-corrosive to skin, mucous membranes, or organic material, is safe to handle and has no adverse effect on the environment. The Disinfection Process must always follow the Cleaning Process to maximize disinfection efficacies.
Powerful & Sustainable
HOCl Technology
• Non-WHMIS regulated
• Non-Hazardous
• Zero Surface Contact Residue
Step 1: Prepare Device
Step 2: Add EnviroNize®
Disinfectant Solution
Step 3: Deploy EnviroNize®
Disinfectant Solution
Step 4: See Label For Suggested Contact Time.
Allow sufficient contact time to activate then
wipe same key, high-touch, non-porous surfaces.
VALIDATION
Deploying the EnviroNizer™ Cordless to CLEAN and to DISINFECT using the appropriate solutions (EnviroNize® Catholyte), FIRST to clean all Key High Touch Non-Porous Surfaces, then disinfecting the same key high touch surfaces using EnviroNize® Disinfectant solutions and following the label use applications will result in maximum protection against unwanted pathogens.
